Dixie Contractor

Dedicated to the people who make our built environment better and safer. We tell your stories and celebrate your successes.

Register with us and receive industry news and content only available to subscribers.

Subscribe
Contacts

Indianapolis, IN, USA (HQ)

903 E. Ohio St., Indianapolis, IN 46202

Call: (317) 423-2325

info@acppubs.com

Maximizing the Work of Your Telehandler

by: John Boehme, Senior Product Manager, Telehandlers, JLG
Reaching further than a forklift and requiring less training than a crane, picking and placing suspended loads with a telehandler can be done easily with fork-positioning carriages.
Reaching further than a forklift and requiring less training than a crane, picking and placing suspended loads with a telehandler can be done easily with fork-positioning carriages.
Keeping pipes centered on the attachment during transport prevents them from falling off and limiting travel speed.
Keeping pipes centered on the attachment during transport prevents them from falling off and limiting travel speed.
Operators can adjust the forks to the correct spread of palletized loads, without leaving the cab.
Operators can adjust the forks to the correct spread of palletized loads, without leaving the cab.
John Boehme, Senior Product Manager, Telehandlers, JLG
John Boehme, Senior Product Manager, Telehandlers, JLG
Today, you can use different implements on your telehandler to pick up, stack, load, unload, scoop, dump, lift, carry, and/or place job site materials. Even with so many options, fork and carriage attachments are still by far the most popular tools used on these machines.

With a variety of sizes, widths, and styles of fork and carriage attachments to choose from, let’s look at some of the different options.

Carriage Attachments
When you want to transport or place a load with no special features, you can choose a standard carriage.

With added features, the carriage can provide additional positioning of the load. For instance, side-tilt carriages can position the load properly for transport across uneven terrain and can also pick or place loads that are not on a level surface.

Side-swing carriages provide offset placement of the load in angles from 50 degrees to 90 degrees on each side from the center. This is useful when the machine is unable to provide a direct path to the load due to tight workspaces.

Fork-positioning carriages offer a powered means to situate the forks at the correct spread for palletized loads, without the operator needing to leave the cab. Side-shifting carriages can shift the entire carriage and fork in either direction. This is useful if positioning the machine side-to-side is not possible when picking up a load or if lateral placement of the load is necessary.

Bomag - Roller
Your local Bomag Americas dealer
Linder Industrial Machinery

The 180-degree swing carriage gives you the ability to get loads into minuscule areas. It was designed to permit the maneuvering of loads through openings and tight spaces, like windows and scaffolding. If the telehandler is unable to fit through a restricted space, such as between two buildings, this attachment allows you to manipulate the load at the end of the boom and place it in the desired location.

The 90-degree swing carriage was also designed as a solution to this problem but is limited in its swing (45 degrees to the left and right). To give you more flexibility while working in tight spaces, the 180-degree swing carriage is an offset, pivoting attachment, allowing you to rotate outside the machine’s wheels. If the attachment were centered on the end of the boom, the load might interfere with the machine’s structure or you would need to lift the boom to avoid interference. Instead, the swing carriage is designed to allow operation when the boom is extended and retracted.

Specialty Fork Attachments
There are many specialty fork-mounted attachments that were developed to meet specific job site applications.

For example, while telehandlers are designed to lift objects, it is sometimes difficult to transport long pipes from one end of the job site to the other. If items are not completely centered on the attachment, pipes could fall off and travel speed would be severely limited. So, users requested an attachment that would hold pipes in place and help operators meet time constraints.

The pipe grapple was designed for this purpose — to handle and transport various pipe diameters and lengths. Resembling a carriage, the pipe grapple has two arms that fold down onto the pipes, securing and preventing the load from rolling off or tipping sideways. This allows you to transport pipes securely from point A to point B. If no items need to be held down, the arms can be placed in an idle, vertical position and you can use the telehandler for typical palletized loads.

A fork-mounted work platform can be installed on a carriage and used to lift personnel in jobs that require hands-on work at heights.

Fork-mounted trash hoppers are another specialty attachment for telehandlers that help keep job sites clean and safe. They are equipped with a feature that allows you to empty the hopper’s contents without leaving the comfort of the telehandler cab.

Sheet material handler attachments are ideal for building projects, giving you the ability to confidently lift and place a variety of materials. The attachment can be used for picking and placing sheetrock, drywall, plywood, green board, and other sheet materials.

A quick coupler-mounted sheet material handler attachment can lift up to 3,000 pounds and offer a 72-inch maximum fork spread, allowing for heavy and wide materials to be delivered at height. To reduce worker fatigue, a typical sheet material handler attachment will have a 100-degree fore and aft fork tilt and 180-degree side swing, which ensures accurate, convenient placement at the desired location.

Choosing the Tool for the Task
Understanding the nature of the work to be accomplished and the capabilities of the various fork and carriage attachments is important when choosing the right tool for the task.

For example, what type of material do you need to handle? How much material needs to be moved? Where does the material need to be moved? Answering questions like these will help you select the appropriate size and type of fork and carriage attachment for the work you need your telehandler to do.

Having the right attachment maximizes the benefits of your telehandler and contributes to a safe, efficient, and productive job site.

Wirtgen America Inc
Your local Wirtgen America dealer
Dobbs Equipment (DXC)
Power Equipment Co
Wirtgen America Inc
Your local Wirtgen America dealer
Dobbs Equipment (DXC)
Power Equipment Co
Leeboy - Pavers/Asphalt
Your local LeeBoy dealer
Power Equipment Co